A Mostly British Obsession
Note: I’ve been really ill for almost three weeks…and that, combined with the holidays and ongoing “life events” has meant not having had a lot of time to devote to the Morgan or just about anything else.
The painted body went back on the car (in a semi-permanent fashion), and that lets me get on with some firewall stuff.
Note: I’ve been really ill for almost three weeks…and that, combined with the holidays and ongoing “life events” has meant not having had a lot of time to devote to the Morgan or just about anything else.
I did get the body glued together, painted and had a local spring shop repair one of the leaf springs.
Gluing starts tomorrow. Hopefully it won’t be a huge disaster.
I have a short punch list, but the body is ready to come apart for gluing.
The worst part of driving this car home (aside from the sheer terror as I realized what a rolling wreck it was), was that I absolutely could not get my foot past the brake pedal to the accelerator, and vice-versa. It was worse than no brakes, really. Today I decided to fix that problem with what seems to be an effective, if Frankensteinian, bodge.
This door frame is done, with only a couple of very minor glitches. Fits pretty well, though I need to rebuild the hinges…at $75 each, not really excited at the prospect of new ones.
So, the above incomplete door frame has taken me probably 20 hours to get to where I am. It’s really fiddly. I think the remainder of the other door, which needs the armrest and bottom pieces cut, fit, and then shaped, will probably go a bit faster.
I have to add fasteners to the door post on the right side and move the dash “hoop” up about 1/4″. And that’s it for “cut boards and put them in approximately the right place”.
The wood frame is actually bolted to the car, though the frame is not yet glued together.
Not a lot of progress recently, just lots of time spent on things outside of Rusty Keep. But I got a little time to work on the frame…and discovered my angle at the front was R-O-N-G…by a degree. Mind, if you just put the sill board on, I had the right angle. But put the whole tub on the chassis, and it’s off. 19 degrees, not 20.
© 2026 RUSTY HEAPS
Theme by Anders Noren — Up ↑
